R-35 M / R-35 EM



ice-vulcan-1

Date coding and lot numbering when speed counts and print quality is secondary

Hot-ink Rotary Printers

Hot-ink printing involves the transfer of hot ink from an ink roller to a substrate by means of a heated, rotating typeholder.

The type is alternately in contact with the ink roller and the packing film/substrate. When the ink is deposited on the cool film, it solidifies immediately. The ink solidifies at room temperature and is durable up to approximately 90°C.

The printer is ideal for coding products such as ice lollies and chocolate bars where many items must be printed very quickly.

Elmoprint manufactures the hot-ink rotary printers R-35 M and R-35 EM, which are typically used for date coding and batch numbering. The two models are designed to run clockwise and anticlockwise respectively and with two different types of control units.

R-35 M

The R-35 M is a compact, uncomplicated coder for building in to packing machines. It is economical, fast and operationally reliable, and it is ideal for coding that does not need to be book-print quality.

The R-35 M is a mechanised printer driven by the friction of a rubber wheel against the packing film. The typeholder can be adapted to the specific requirement, e.g. it is possible to print all the way around the typeholder.

Film speed

Max. 45m/min

Printing speed

550 prints/min

Printed area

30x30 mm

Printing distance

80mm or 160mm

Film direction

Both ways

Starting signal

None

Power connection

230V/50Hz

Electricity consumption

150w

Dimensions (H x W x L)

100x80x130

Working temperature

80-130 C

Heat control

Elmoprint heat control using NTC sensor
(Possibly FeKo sensor for remote control.)

R-35 EM

R35 EM is also friction-driven but has a built-in clutch which enables the position of the print to be determined by a photo code on the packing film, for instance.

Film speed

8-30 m/min

Printing speed

300 prints/min.

Printed area

30x30 mm

Trykafstand

80 mm

Printing distance

Left to right (standard)
Right to left (must be ordered) Photocell or inductive sensor

Starting signal

230V/50Hz

Power connection

220w

Electricity consumption

100x80x205

Dimensions (H x W x L)

80-130 C

Working temperature

Elmoprint heat control using NTC sensor

Heat control

(Possibly FeKo sensor for remote control.)

 

Images of R-35 M

 

R-35 M / R-35 EM

Did you know that...?

Elmoprint sells its own production of hot-stamp coders and hot-ink printers all over the world. For example, we have distributors in Australia, South America and North America.

Contact us

If you have any queries about our products, please feel free to phone or write to us.

Get in touch